Pin Header, a type of connector. This connector is widely used in electronic, electrical, instrument in the PCB circuit board, its role is in the circuit is blocked or isolated between the circuit, play a bridge function, take up the task of current or signal transmission. It is usually used with the busbar to form a board-to-board connection. Or matching with the electronic wiring harness terminal, forming a board-to-wire connection; Can also be used independently for board to board connection.
Because the specifications required by different products are not the same, so the row of needles also have a variety of model specifications, according to the standard classification of the electronic industry row of needles connector: according to the spacing can be roughly divided into 2.54mm, 2.00mm, 1.27mm, 1.00mm, 0.8mm five categories, according to the number of rows of single row of needles, double row of needles, three rows of needles; According to the packaging rules with SMT(horizontal paste/vertical paste), plug-in DIP(direct insert/bend insert); According to the installation mode, 180° is represented by S, 90° by W, and SMT by T.

Product Name	Custom DIP Spring Loaded Contact Pogo Pin For PCB Mount Pin Connector
Material	stainless steel, Brass, Aluminum, Etc.
Finish	Zinc / Nickel / Copper Plating, Powder Coating, Etc.
Standard	Nonstandard or OEM
MOQ	100pcs
Package	PE bag inside, carton outside or per our customers needs

Structure	Ball beads structure	Sloping structure	Perforated structure	Claw structure
Contact impedance	≤ 10mΩ	≤ 30mΩ	≤ 50mΩ	≤ 5mΩ
Long service time	10000+	10000+	10000+	500+
Recommended working current	10A max	10A max	10A max	10A max
Main application areas	Mainly used for charging and condition with certain requirements for vibration and shock	Mainly used for charging or signal transmission of Consumer electronics	Mainly used for signal transmission or grounding antenna,etc.	Mainly used high-frequency,anti-instantaneous,the situation which high-reliability is required,such as base stations,military industries,vehicles.
Remarks	The beads increase the internal contacts,the contact is more stable,and the more needle space is required	The most commonly used structure on the market	The space is smaller,but the contact is not stable,the current is easy to run through the spring,and it is not recommended for charging	The needle and the needle tube have multiple contacts to increase the contact stability

How to place the order
* You send us drawing or sample

* We carry through project assessment

* We make the sample and send it to you

* You think the sample is good then place an order and pay us 30% deposit

* We start to make the product

* When the goods is done, we take photoes for your check and you then pay the balance

* We deliver the products to courier company

Product Tags:

right angle cat5 connector

threaded clevis pin

Inquiry Cart 0